Jain Irrigation Systems Ltd.
Small Ideas, Big Revolutions.®
Home Company Solution / Services Products Site Map Search Reach us

Jains Share in Agriculture

Drip Irrigation Systems

Sprinkler Irrigation Systems 

Control & Safety Valves 

Filtration Systems 

Fertigation System & Chemigation Equipment 

Pipes & Fittings  

Turnkey Project Services 

Green Houses 

Plant Tissue Culture 

Nursery Plants and Systems 

Bio Fertilizer 

Agri &  Engineering Consultancy 

Processed Food 

Plastic Sheet 

Renewable Energy


Locate us

You are here: Home - Products - Drip Irrigation - Octa Bubbler

Octa Bubbler

Features and Specifications:

  • Manufactured with UV & sunlight resistant, chemical resistant non corrosive plastic material for stable performance.

  • An eight-outlet self cleaning, pressure compensating bubbler.

  • Wide pressure compensating range of 1.5 to 4 kg/cm2 (21.33 to 56.88 psi).

  • Precision moulded liquid silicone rubber diaphragm ensures pressure compensation, uniform water application and long lasting high quality performance.

  • 180º swivel barbed outlet provides flexibility of positioning the extension tubing to any required direction.

  • Coefficient of manufacturing variance less than 7%.

  • Available in four colour coded models. Flow per outlet is,
    Blue - 7.5 lph (2 gph)
    Black - 23 lph (6 gph)
    Red - 39 lph (10 gph)
    Green - 75 lph (20 gph)
    Flow control devices are interchangeable facilitates selection of variable discharge in one Octa-Bubbler. Also available with purple cap for reclaimed water use.

  • Built-in back flow prevention device engineered for added protection.

  • Designed to operate equally well for above or below grade.

  • Available with 1/2” FPT inlet.

  • Can be used with 6mm OD extension tubing/vinyl tubing for water distribution.

Applications:

  • Ideal for converting sprinkler system to low flow, because it is designed to apply the amount of water the plants need during the time of sprinkler zone operates.

  • Can be used to irrigate where lateral requires to run for longer length and irrigation time is a limitation e.g. landscaping of road dividers, shrub island between turfs and lawns, trees, flowers and ground cover planting beds.

Ordering Specifications:

Example:DOCT186 - This code represents Octa-Bubbler of flow 75 lph (20 gph) per outlet.

Note:

  • Octa-Bubbler with purple cap for reclaimed water use, please write the code as DOCT186P insted of DOCT186.

  • Octa-Bubbler can also be supplied as an assembly including 1/2” stake, 6mm OD PE/Vinyl Tube of 1 m length, emitter holding stake, on demand. Please specify for any other configuration.

  • Please specify for combination of flow control device if required.

  • U.S. Patent No. 5,222,771

Performance Graph:

Flow Control Device for Octa Bubbler



Code Despcription
D8160 Blue - 7.5 lph (2 gph)
D8560 Black - 23 lph (6 gph)
D8960 Red - 39 lph (10 gph)
D81860 Green - 75 lph (20 gph)

More Crop Per Drop®

Drip Irrigation Components
Emitting Pipe
Drip Tape
Polyethylene Hose & Tubes
Emitting Devices
Jets
Fogger and Misters
Bubblers
Mini Sprinklers
Rainport Semi-Permanent
Irrigation Systems
Poly Fittings & Accessories
Sprinkler Irrigation Systems
Lawn & Garden Pop-ups
Overhead Sprinkler
Automation Systems
Types of Automation Systems
Fertigation Solutions
Automation FAQ's
Jain Valves
Plastic Control Valves and Safety Valves
Filtration System
Sand Separator
Screen filter
Media Filters & Manifolds
Backwash Controller
Fertigation Systems & Chemigation Equipments
Proportional Injector Pump
Ventury Injector
Jain Fertilizer Tank
Manifold Fertigation
Jain Pipe and Pipe Fittings
PVC Pressure Pipes (Solvent Welded) / Quick Fix™ PVC Pipe (Rubber Ring Joint Pipes)
Jain PVC Cable Duct
Jain PVC Well Casing and Screen Pipe
Jain Sure-Loc® Well Casing and Screen Pipe
Jain Sure-Loc® Column Pipe
HDPE Pipes
Quick-Connect® PE Pipes
HDPE Sure-Loc® Pressure Pipes and Pipe Fittings
Jain PE Duct
Polyethylene Gas Piping System
SWR Pipes
SWR Fittings
SWR Installation Procedure
Design-Technical Information
Units and Conversions
Design Data
Guidelines for Climate Control of Temperature and Humidity in Greenhouses
General Guidelines for Maintenance of Drip irrigation system
General Maintenance of Guidelines for Filters
Guidelines for use of Drip Tapes
General Guidelines for Drip Irrigation Systems
Container Loading Details
Chemical Resistance Table
Warranty
Trade Mark
Certifications

Top

Products & Services Events / News Add to Favroite © Jain Irrigation Systems Ltd.