Jain Fogger

Features and Specifications:

• Manufactured from stable engineering plastic.

• Simple construction with no moving parts, minimises maintenance.

• Designed for misty spray. Gives very fine droplets.

• Coloured nozzles for various flow rates.

• Easy to disassemble & clean.

• Recommended operating pressure 3.0 kg/cm² (42.66 psi).

• Available in following inlet options:
  

  1. 4 mm barbed inlet.
  
  
  2. 5/32” (4mm) 10-28 UNS screwed inlet.
  
  
  3. Push fit type inlet.



• Minimum filtration requirement 75 micron.

• Easy to install with different mounting options

  1. For Fogger with barbed inlet-
  1. Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.
  2. For Fogger with 5/32” (4mm) 10-28 UNS screwed inlet-
  1. Clip Stake for J-Jets / Foggers / Misters (Code: DCSJ) with rigid riser of suitable length.
  2. Stake for Modular / J-Jets / Foggers / Misters (Code : DSJF4 / DSJF8)
  3. Square stake for J-Jets / Foggers / Misters (Code : DSSJ)
  3. For Fogger with push fit inlet -
  1. Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.


• Fogger assembly options available on demand.

Applications:

• Recommended for orchards and green/glass houses requiring fine mist spray for temperature and humidity control.

• Suitable for crops require to maintain micro climate in the canopy area.

Technical Specifications:

* At an operating pressure of 3kg/cm² (42.66 psi).
Note: Please refer Design and Technical Information section for design details.

Ordering Specifications:

Example: DFOG14B - This code represents Fogger having 14 lph discharge and 4mm barbed inlet connection.

Go to related products: Drip Irrigation

Click here for more details