Jain Irrigation Systems Ltd.
Small Ideas, Big Revolutions.®
Home About Jains Investors Information Sitemap/Search Contact us Career / Job
Jains Share in Agriculture You are here: Home - Products - Drip Irrigation - J-Bubbler-PC More Crop Per Drop ®
Sprinkler Irrigation Systems
PVC Pipes & Fittings
Polyethylene Pipes and Fittings
Plastic Sheet
Processed Food
Protected Cultivation
Renewable Energy

Locate us

Downloads

J-Bubbler-PC

Features and Specifications:

  • Manufactured from stable engineering plastic.

  • Pressure compensating bubbler with trickle pattern with an emitter exponent of 0.09.

  • Uniform flow at varying pressure from 1-3 kg/cm² (14.22 - 42.66 psi).

  • ½” BSP female threaded inlet.

  • Special inlet filter screen to prevent clogging.

  • Can be easily mounted on stake for bubbler or on multipurpose stake with adaptor for bubbler or on PVC risers.

  • Available in 1.2 lpm, 2 lpm and 4 lpm (0.3 gpm, 0.5 gpm & 1 gpm) nominal discharges.

  • Supplied with special filter to prevents blockage by sand / silt particles which ensures trouble free operation for longer period.

  • Bubbler stake assembly with 13mm ID, 12 & 16mm OD tubing in required length available on demand.

  • Minimum filtration requirement 120 micron.

Applications:

  • Suitable for palms, trees, shrubs etc. planted over undulating terrain and where uniform flow is essential.

  • Suitable for controlled irrigation of trees having high water requirements.

Ordering Specifications:

Example: DJBPC20 - This code represents J-Bubbler - PC having 2 lpm discharge.

Performance Graph:

Top

   
Products & Services Events / News Add to Favroite © Jain Irrigation Systems Ltd.