Jain Irrigation Systems Ltd.
Small Ideas, Big Revolutions.®
Home Company Solution / Services Products Site Map Search Reach us

Jains Share in Agriculture

Drip Irrigation Systems

Sprinkler Irrigation Systems 

Control & Safety Valves 

Filtration Systems 

Fertigation System & Chemigation Equipment 

Pipes & Fittings  

Turnkey Project Services 

Green Houses 

Plant Tissue Culture 

Nursery Plants and Systems 

Bio Fertilizer 

Agri &  Engineering Consultancy 

Processed Food 

Plastic Sheet 

Renewable Energy


Locate us

You are here: Home - Products - Drip Irrigation - 2002 Aquasmart

2002 Aquasmart

Features and Specifications:

  • Flow regulated micro-sprinkler for optimal undertree irrigation.

  • Constant flow between 1.5-4.0 kg/cm² (20-60 psi) pressure.

  • Uniform irrigation and fertigation at all topographical conditions.

  • Wide range of flow rates and distribution patterns.

  • Insect-proof pop-up swivel.

  • Sturdy and solid structure.

  • Easy to dismantle and assemble.

  • On demand 2002 AquaSmart can be supplied as an assembly.

  • Clogging resistant even at lowest flow rates.

  • Operating pressure: 1.2 to 4.0 kg/cm² (17- 56.88 psi).

  • Flow rate: 20 to 95 lph.

  • Wetted diameters: 3.0 to 7.5 m

  • Special swivel (green) for inverted operation.

  • Two-stage wetted diameter control.

Technical Specifications:


Nozzle
Colour
Flow Rate (lph) Nozzle Size Swivels - Wetted diameter (m)
(mm) Orange* Black Blue Red Green (Inverted)**
Violet 20 0.84 3.0 3.5 4.0*** - 5.0
Gray 28 1.00 3.0 4.0 4.5*** - 5.0
Brown 35 1.10 3.5 4.0 5.0 - 6.0
Blue 47 1.25 4.0 5.0 5.0 6.0*** 6.0
Green 55 1.33 4.5 5.0 5.5 6.5 6.0
Orange 70 1.48 - 5.0 6.0 7.0 6.5
Yellow 95 1.75 - 5.5 6.5 7.5 6.5

All swivels tested at 0.25m above ground
* Single stage (no diameter limiter)
** Green swivel tested at 1.2 m above ground.
*** To be used only without diameter limiter.

Performance Graph:

Ordering Specifications:

Example: D216243 - This code represents 2002 AquaSmart with one stage blue swivel, 3/8 threaded housing and blue coloured nozzle.


More Crop Per Drop®

Drip Irrigation Components
Emitting Pipe
Drip Tape
Polyethylene Hose & Tubes
Emitting Devices
Jets
Fogger and Misters
Bubblers
Mini Sprinklers
Rainport Semi-Permanent
Irrigation Systems
Poly Fittings & Accessories
Sprinkler Irrigation Systems
Lawn & Garden Pop-ups
Overhead Sprinkler
Automation Systems
Types of Automation Systems
Fertigation Solutions
Automation FAQ's
Jain Valves
Plastic Control Valves and Safety Valves
Filtration System
Sand Separator
Screen filter
Media Filters & Manifolds
Backwash Controller
Fertigation Systems & Chemigation Equipments
Proportional Injector Pump
Ventury Injector
Jain Fertilizer Tank
Manifold Fertigation
Jain Pipe and Pipe Fittings
PVC Pressure Pipes (Solvent Welded) / Quick Fix™ PVC Pipe (Rubber Ring Joint Pipes)
Jain PVC Cable Duct
Jain PVC Well Casing and Screen Pipe
Jain Sure-Loc® Well Casing and Screen Pipe
Jain Sure-Loc® Column Pipe
HDPE Pipes
Quick-Connect® PE Pipes
HDPE Sure-Loc® Pressure Pipes and Pipe Fittings
Jain PE Duct
Polyethylene Gas Piping System
SWR Pipes
SWR Fittings
SWR Installation Procedure
Design-Technical Information
Units and Conversions
Design Data
Guidelines for Climate Control of Temperature and Humidity in Greenhouses
General Guidelines for Maintenance of Drip irrigation system
General Maintenance of Guidelines for Filters
Guidelines for use of Drip Tapes
General Guidelines for Drip Irrigation Systems
Container Loading Details
Chemical Resistance Table
Warranty
Trade Mark
Certifications

Top

Products & Services Events / News Add to Favroite © Jain Irrigation Systems Ltd.