Jain Irrigation Systems Ltd.
Small Ideas, Big Revolutions.®
Home Company Solution / Services Products Site Map Search Reach us

Jains Share in Agriculture

Drip Irrigation Systems 
Sprinkler Irrigation Systems

Control & Safety Valves 

Filtration Systems 

Fertigation System & Chemigation Equipment 

Pipes & Fittings  

Turnkey Project Services 

Green Houses 

Plant Tissue Culture 

Nursery Plants and Systems 

Bio Fertilizer 

Agri &  Engineering Consultancy 

Processed Food 

Plastic Sheet 

Renewable Energy


Locate us

You are here: Home - Products - Sprinkler Irrigation - Spray Pop-ups

Spray Pop-ups

Features and Specifications:

  • High impact and corrosion resistant engineering plastic construction.

  • Heavy duty SS retraction spring.

  • Anti Drain Valve to avoid puddling.

  • Ratchet mechanism to adjust the spray direction.

  • Separate filter at nozzle inlet.

  • Wiper seal with self flushing mechanism.

  • SS Screw for fine tuning of radius.

  • Uniform distribution profile.

  • Operating pressure 2 kg/cm² (28.44 psi).

  • Available in 2” & 4” popup height.

  • ½” BSP female threaded bottom inlet.

  • Available in full, half, quarter and three quarter circle spray patterns.

 

 

 

 

 

 

Applications:

  • Recommended for landscape, turf and home gardens.

Technical Specifications:


Pattern Pressure Radius Discharge Precipitation
Rate mm/hr
kg/cm² psi m ft lpm gpm
1.0 14.22 2.30 7.54 10.5 2.8 119 138
1.5 21.33 2.50 8.20 12.7 3.4 122 142
2.0 28.44 3.25 10.56 14.4 3.8 82 95
2.5 35.55 3.75 12.30 15.2 4.0 65 75
3.0 42.66 3.95 12.95 17.0 4.5 65 75
1.0 14.22 2.30 7.54 7.4 2.0 84 98
1.5 21.33 2.50 8.20 9.0 2.4 86 100
2.0 28.44 3.25 10.56 10.2 2.7 58 67
2.5 35.55 3.75 12.30 11.4 3.0 49 57
3.0 42.66 3.95 12.95 12.4 3.3 48 55
1.0 14.22 2.30 7.54 6.3 1.7 71 83
1.5 21.33 2.50 8.20 7.7 2.0 74 86
2.0 28.44 3.25 10.56 8.5 2.2 48 56
2.5 35.55 3.75 12.30 9.5 2.5 41 47
3.0 42.66 3.95 12.95 10.7 2.8 41 48
1.0 14.22 2.30 7.54 3.9 1.0 44 51
1.5 21.33 2.50 8.20 4.5 1.2 43 50
2.0 28.44 3.25 10.56 5.2 1.4 30 34
2.5 35.55 3.75 12.30 5.8 1.5 25 29
3.0 42.66 3.95 12.95 6.6 1.8 25 30

Ordering Specifications:

Example: POP2QC - This code represents Spray Pop-ups having 2” pop-up height with quarter circle spray pattern.

Related Link :
Pop-up Accessories

Nozzle for Spray Pop-Ups

More Crop Per Drop®

Drip Irrigation Components
Emitting Pipe
Drip Tape
Polyethylene Hose & Tubes
Emitting Devices
Jets
Fogger and Misters
Bubblers
Mini Sprinklers
Rainport Semi-Permanent
Irrigation Systems
Poly Fittings & Accessories
Sprinkler Irrigation Systems
Lawn & Garden Pop-ups
Overhead Sprinkler
Automation Systems
Types of Automation Systems
Fertigation Solutions
Automation FAQ's
Jain Valves
Plastic Control Valves and Safety Valves
Filtration System
Sand Separator
Screen filter
Media Filters & Manifolds
Backwash Controller
Fertigation Systems & Chemigation Equipments
Proportional Injector Pump
Ventury Injector
Jain Fertilizer Tank
Manifold Fertigation
Jain Pipe and Pipe Fittings
PVC Pressure Pipes (Solvent Welded) / Quick Fix™ PVC Pipe (Rubber Ring Joint Pipes)
Jain PVC Cable Duct
Jain PVC Well Casing and Screen Pipe
Jain Sure-Loc® Well Casing and Screen Pipe
Jain Sure-Loc® Column Pipe
HDPE Pipes
Quick-Connect® PE Pipes
HDPE Sure-Loc® Pressure Pipes and Pipe Fittings
Jain PE Duct
Polyethylene Gas Piping System
SWR Pipes
SWR Fittings
SWR Installation Procedure
Design-Technical Information
Units and Conversions
Design Data
Guidelines for Climate Control of Temperature and Humidity in Greenhouses
General Guidelines for Maintenance of Drip irrigation system
General Maintenance of Guidelines for Filters
Guidelines for use of Drip Tapes
General Guidelines for Drip Irrigation Systems
Container Loading Details
Chemical Resistance Table
Warranty
Trade Mark
Certifications

Top

© Jain Irrigation Systems Ltd.
Site enabled by : Jainart    Best viewed in 800 × 600 Resolution with IE 4.0 or Firefox 1.0.5 or higher