Features and Specifications:
-
Self cleaning suction filter.
-
Hydraulically powered spray rotor continuously displaces trash/debris away from the screen.
-
Flushing of screen using filtered water. Special provision of ¾” screen filter to avoid plugging of nozzles (optional).
-
Constructed from mild steel body and stainless steel screen. Stainless steel body can be supplied on demand.
-
Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion.
-
Low frictional loss across the filter.
-
Strong metal ribbed supported screen to avoid collapse due to suction pressure.
-
Available in standard screen size of 400 micron. Other screen size can be supplied on demand.
-
Maintains constant flow rate.
-
Helps to improve system efficiency by reducing load on the micro irrigation filters.
-
Low maintenance. Does not require frequent removal of suction pipe or cleaning of foot valve.
|
-
Minimum operating pressure for spray rotors is 1 kg/cm² (14 psi).
-
Protects pump and piping system damage and clogging due to physical impurities.
-
Available in 2½”, 3” and 4” sizes without foot valve. Please specify for Jain foot valve (plastic) or metal foot valve option while ordering.
-
Standard end connections are BSP flanged. Please specify for other end connections.
Applications:
-
Recommended to use for water source having heavy load of algae, trash, sand and other debris.
-
Best suitable for irrigation pumping lines running on open wells, reservoirs, ponds, tanks etc.
|
