Sand Separator - Jain Hydro cyclone Filter

Features and Specifications:

• Mild steel construction.

• Powder coated with 70 to 80 micron thick deep blue coloured pure polyester from both inside and outside surface for protection against corrosion and weather effects.

• Hydro dynamically designed to create maximum centrifugal action to separate particles heavier than water.

• Removes fine sand and silt particles of size higher than 75 microns and specific gravity more than 2.65.

• Special protection plate is provided at the bottom of the cone to avoid wear due to strong vortex.

• Large volume of dirt collection chamber increases flushing interval.

• Dirt can be easily flushed out through dirt collection chamber.

• Maximum operating pressure 10 kg/cm2 (142 psi).

• Standard end connections are BSP flange. Please specify for other end connections. (ANSI flange or Easy-Fix™).

• Recommended to install before media/screen filters to remove all particles heavier than water.

• Improves operational efficiency & life of media /screen filters.

• Can also be supplied in stainless steel as a special order.

Applications:

• Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Technical Specifications :

Clean Pressure Drop for Jain Hydro-cyclone Filter:

Note: Tested under standard testing conditions.

Ordering Specifications:

Example: JHFM025 - This code represents Jain Hydrocyclone Filter with mild steel construction having 25 m³/hr nominal flow capacity.
Note: Jain Hydrocyclone Filter of any other size, flow capacity or end connections can be supplied on request..

Go to related products: 4

Click here for more details