|
Features and Specifications:
-
Manufactured from virgin plastic for stable performance.
-
Factory sealed emitter.
-
Turbulent flow-path with wide cross sectional area makes the dripper clog resistant.
-
Narrow cross shaped inlet acts as a filter.
-
Coloured base facilitates easy identification of flow rate.
-
UV stabilised. No environmental effects.
-
Barbed connection suitable for 4mm (0.157 inch) ID tube on both sides facilitates looping of drippers around trunk of the tree. Helps to avoid dispositioning of emitters.
-
Manufacturing coefficient of variation, CVm ≤ 3%. Higher field emission uniformity.
|
-
Facilitates loop type installation.
-
Required punch diameter 2.9 mm.
-
Minimum filtration requirement - 100 micron.
Applications:
|
Technical Specification:
| Code |
*Discharge |
Colour of
cap & insert |
Emitter Expon. (x) |
Flow Coeff. K** |
| lph |
gph |
| DMIL02 |
2.0 |
0.53 |
Yellow |
0.44 |
2.0 |
| DMIL04 |
4.0 |
1.06 |
Black |
0.44 |
4.0 |
| DMIL08 |
8.0 |
2.12 |
Blue |
0.47 |
8.0 |
* At operating pressure of 1kg/cm²
(14.22 psi). |
Ordering Specifications:

Example: DMIL02 - This code represents
Mini Inline® Emitter having 2 lph discharge. |
Performance Graph:

Note: Test are under standard
test conditions. |
|
 |
|

|
|
Go to related products: Drip Irrigation |
Click here for more details |