Jain Irrigation Systems Ltd.
Home Company Solution / Services Products Site Map Search Reach us

Jains Share in Agriculture

 Drip Irrigation Systems 

Sprinkler Irrigation Systems 

Control & Safety Valves 

Water Filtration Systems 

Fertigation System & Chemigation Equipment 
Pipes & Fittings

Turnkey Project Services 

Green Houses 

Plant Tissue Culture 

Nursery Plants and Systems 

Bio Fertilizer 

Agri &  Engineering Consultancy 

Processed Food 

Plastic Sheet 

Solar Water Heating System

Locate us

You are here: Home - Products - Pipes - Jain PE Cable Duct

Jain PE Cable Duct

JAIN HDPE - PLB OPTICAL FIBRE CABLE DUCTS
  • Jain Co-Extrusion process was developed in-house by JAINS in their R&D facility during 1993.
  • Jain HDPE Ducts (permanently lubricated) is the result of innovative development in co-extrusion by JAINS.
  • It is the versatile and unique solution for High Speed Air Blowing of Optical Fibre Cable.
  • Jain Cable Ducts are manufactured with state-of-the-art machinery using latest processing technology and fulfill the performance requirement of National and International specifications.
  • Approved by BSNL under TEC specification G/CDS-08/02 November 2004.
  • Approved vendor and supplier to PGCIL, IOCL, GSPL, BSNL, MTNL Tata Tele, Hutch in India and also many customers in other countries as well. Can specially deliver tailor-made as per specifications to suit customer's requirement.
  • Supplied in coils of various lengths upto to 110 mm.
  • Supplied with pre-inserted PP rope on request.

JAIN SILICOAT® PE DUCT
Jain Silicoat® PE Duct is extruded from selected high quality virgin HDPE material and co-extruded with special lubricant that is distributed uniformly along the entire inner surface of the duct providing a low friction smooth surface for easy cable drawing or blowing. The outer HDPE shell makes the pipe more tough and durable and enables the duct to withstand the pressure during HSAB of cable as well as retains the roundness under soil pressure and traffic load. Jain Silicoat® PE Ducts conform to BSNL specification & has type approval certificate.

JAIN SELF LUBRICATED PE DUCT
Jains now manufacture Jain SLB PE Duct which is the latest innovation from their R&D. JAIN SLB PE ducts are manufactured with high performing virgin HDPE material with the inner surface of the duct self lubricated by homogenous construction to give a smooth finish and low co-efficient of friction. Jain SLB PE Ducts have the same constructional stability and strength as that of Jain Silicoat® PE Duct and can withstand the pressure during HSAB as well as traffic load. JAIN SLB PE ducts conform to BSNL Specification and has Type Approval Certificate.

JAIN RIBBED WALLED DUCT

Jain Ducts can also be supplied with inner lubricated area in ribbed form. Ribbed Wall is ideal for pulling or jetting cable, thus reducing surface contact with cable during installation. It is available in various sizes and colours.




Salient Features
Advantages
Concentric layers of tough HDPE outer shell co-extruded with an inner layer of solid special Lubricant.
Low co-efficient of friction for easy, safe and fast installation of OFC by High Speed Air Blowing without damage to duct. Can withstand blowing pressure of 140 to 150 psi. Cables can be removed and re-blown number of times.
Available in Orange, Blue, Green, Yellow, Red, Purple, Grey and Black colours. Other colours on demand.
Easy identification of cables installed.
Available in coils of 250, 500 and 1000 meters. Coils of 2000 and 3000 meters & Duct Wound on wooden/steel drums can be made available on demand.
Reduces the joints in the network. Reduced cost of installation and time.
Every metre of duct in the coil marked with progressive measurement.
Ensures accurate installation and measurement.
Ducts with pre-inserted rope for pulling cable available on demand.
Provides an alternative to HSAB of cable when equipment and expertise not available with the provider.
Pressurized coils with compressed air up to 1 kg/cm² is available.
This helps easy identification of damaged ducts prior to installation to avoid trouble in cable blowing.
Duct coils are provided with end seals.
The end seals prevent dirt and soil entry in to the duct during duct laying and safe guards duct till cable blowing.
Blowing of cables can be undertaken on request. Requisite accessories like Joiner, End Plugs, Duct Cutter, Spanner etc. Available.
Enhances speed & ensures safe, easy & quality installation.

PERFORMANCE PARAMETERS
SN Test Unit Standard Value
1. Tensile Strength
N/mm²
>20
2. Elongation
%
>500
2. Reversion
%
<+3
3. E S C R (As per ASTM D-1693)
96 Hours
Sample should not crack during test period
4. Impact Strength

Kg
The duct shall not crack or split (At 10 Kg. Load)
5. Crush Resistance  The Deflection with Load 
The Deflection after
Recovery
%

%
≤ 10
 
 ≤ 2
6. Mandrel Test  
The Mandrel shall be passed freely through a 5 mtr length of duct, when the duct is bent to a radius of 5 mtrs.
7. Oxidation Induction Test
Minutes
> 30
8. Internal Coefficient of Friction  
Not More than 0.06
9. Melt Flow rate (at 5 kg, 190º C)
gm/10 min
0.2 to 1.1
10. Density (Finish Product)
gm/cc
0.940 To 0.958
11.

Hydraulic Characteristics At temp 80º C.

  
The Sample shall not show sign of localized swelling or leakage & shall not burst during the test period.
  Test Duration Induced Stress
Type Test 165 Hrs 3.5 Mpa
Acceptance Test 48 Hrs 3.8 Mpa
12. Ash Content % 0.3 Max

Standard
dimensions (OD/ID)		 Tolerance on
 wall thickness		 Co-efficient
 of friction
50/42 mm* ± 0.3 mm < 0.06
40/33 mm ± 0.2 mm < 0.06
32/26 mm ± 0.2 mm < 0.06
32/28 mm ± 0.2 mm < 0.06
29/23 mm ± 0.2 mm < 0.06

* Not included in TEC Specification
** 75/67 mm size also available


JAIN PE PLAIN DUCT

Salient Features

  • Tough and Durable.

  • Jain HDPE Duct Available from 32 mm to 315 mm diameters conforming to IS:4984-1995.

  • Supplied in coils of various lengths upto 110 mm diameter.

IS-4984-1995

  • Requisite specials such as Couplers, Bends, Tee etc. available for easy installation.

  • Used for main ducts, Cable conduits, Road crossings etc.

  • Conforming to BSNL/TEC Specification G/CDS-05/01 Dec. 94 with Amendment No.1 and having valid Type Approval is also available..



 

Go to related product category: Pipes

Click here for more details

More Crop Per Drop®

Jain Pipe and Pipe Fittings
PVC Pressure Pipes (Solvent Welded) / Quick Fix™ PVC Pipe (Rubber Ring Joint Pipes)
Jain PVC Cable Duct
Jain PVC Well Casing and Screen Pipe
Jain Sure-Loc® Well Casing and Screen Pipe
Jain Sure-Loc® Column Pipe
HDPE Pipes
Quick-Connect® PE Pipes
HDPE Sure-Loc® Pressure Pipes and Pipe Fittings
Jain PE Duct
Polyethylene Gas Piping System
SWR Pipes
SWR Fittings
SWR Installation Procedure
Design-Technical Information
Units and Conversions
Design Data
Container Loading Details
Chemical Resistance Table
Warranty
Trade Mark
Certifications
Jain Valves
Plastic Control Valves and Safety Valves
Filtration System
Sand Separator
Screen filter
Media Filters & Manifolds
Backwash Controller
Fertigation Systems & Chemigation Equipments
Jain Fertilizer Tank
Jain Fertilizer Injector
Ventury Injector
J-Injector Pump
Manifold Fertigation
Sprinkler Irrigation Systems
Lawn & Garden Pop-ups
Overhead Sprinkler
Catalogues, Papers and Manuals (PDF files)
Paper presented on Development of Micro Irrigation in India
Irrigation Product Catalogue
J Turbo Aqura
Maintenance Manual on Irrigation System
Micro Watershed to Micro Irrigation
B-Sure™ SWR Piping System
Improved Agro techniques for Sugarcane Under Drip System
[English] [Marathi] [Kannad]
Drawbacks in Conventional Irrigation Methods
Agricultural services offered by JAINS

Top

© Jain Irrigation Systems Ltd.
Site enabled by : Jainart    Best viewed in 800 × 600 Resolution with IE 4.0 or Firefox 1.0.5 or higher